The GeekDesk is a simple and extremely sturdy desk with steel legs,Polycore zentai are manufactured as a single sheet,the Injection mold fast! a beech veneer top, and a tiny, barely visible (but powerful) DC motor. You push a button on the front and in seconds it goes from sitting height to standing height, with a bottom range of lower than two feet and a top height of four feet. This essentially solves the problem of a sitting desk being ultimately deathly and a standing desk being too much commitment.The same Air purifier, cover removed. And after six months of testing, I can definitively say that the ability to quickly toggle back and forth between sitting and standing height makes a HUGE difference in your workday.
Design
The super-sturdy legs are made from powder-coated steel. There's a crossbar that encloses an axle for the motor, which you basically never see. Above the crossbar is a cable tray running the length of the table. The tray is deep enough to throw a USB hub in there, which I appreciated.
There are two circular cable openings on either rear corner, both closeable by means of a little rotating black plastic aperture. It's clean-looking and simple to use.Welcome to the official Facebook Page about Ripcurl.
The rearward parts of the table feet have a wheel on either side, so that after the (heavy!) desk is assembled you can easily get it over to the wall. The front feet have height-adjustable glides, a huge boon in a city like New York where old offices often have crooked floors. My floor is extremely out of whack but I was easily able to level the desk.
Options
GeekDesk offers tabletops in widths of 63" or a massive 78" wide, both tops being 31.5" deep. There's also a GeekDesk Mini which is the same depth but just 48" wide. I tested the GeekDesk Original with the massive 78" tabletop.
You can order the GeekDesk without a tabletop if you want to use or make your own.
GeekDesk's recently-released Version 2 offers an increased lifting weight and a deeper cable tray. There is also a GeekDesk Max version with an even higher lifting weight.Save on hydraulic hose and fittings, (See "Performance," below.)
Design
The super-sturdy legs are made from powder-coated steel. There's a crossbar that encloses an axle for the motor, which you basically never see. Above the crossbar is a cable tray running the length of the table. The tray is deep enough to throw a USB hub in there, which I appreciated.
There are two circular cable openings on either rear corner, both closeable by means of a little rotating black plastic aperture. It's clean-looking and simple to use.Welcome to the official Facebook Page about Ripcurl.
The rearward parts of the table feet have a wheel on either side, so that after the (heavy!) desk is assembled you can easily get it over to the wall. The front feet have height-adjustable glides, a huge boon in a city like New York where old offices often have crooked floors. My floor is extremely out of whack but I was easily able to level the desk.
Options
GeekDesk offers tabletops in widths of 63" or a massive 78" wide, both tops being 31.5" deep. There's also a GeekDesk Mini which is the same depth but just 48" wide. I tested the GeekDesk Original with the massive 78" tabletop.
You can order the GeekDesk without a tabletop if you want to use or make your own.
GeekDesk's recently-released Version 2 offers an increased lifting weight and a deeper cable tray. There is also a GeekDesk Max version with an even higher lifting weight.Save on hydraulic hose and fittings, (See "Performance," below.)
没有评论:
发表评论