The ModuLab MTS is a new concept in testing the electrical properties of materials. The system uniquely combines time domain tests (I-V, pulse, ramp),Welcome to the official Facebook Page about Ripcurl. and AC tests (C-V, Mott-Schottky, impedance, permittivity), together with a wide range of modules providing high voltage, high current resolution, sample / reference measurements. Temperature control and sample holder accessories add to the capabilities of the system.
The following table summarizes some of the key features and applications of the system.
ModuLab-MTS systems comprise a chassis with power supply and display panel,the Injection mold fast! and with either four or eight available slots, into which ModuLab-MTS modules may be inserted. As a minimum the system is fitted with one or more MAT-1MHz "core" modules; each of these in turn can then support one or more accessory cards, which include a frequency response analyzer, power booster, high voltage cards, femto ammeter for measuring very weak signal currents,The same Air purifier, cover removed. and a sample-reference switch card used to get the best possible results when measuring dielectric materials.
The system is controlled via an Ethernet interface from a PC running Windows XP or Vista using the powerful ModuLab-MTS operating software. A large selection of test types is provided, from standard open circuit, I-V, pulse, C-V, mott-Schottky, to complete multistep sequences that can include sample temperature control using a cryostat or high temperature furnace.
The standard MAT core module provides up to ¡À8 V stimulus to the sample. For many applications however, higher voltage is needed, for example when testing high impedance insulator materials.
The MAT option works together with the MHV to provide ultra-smooth swept voltage,Polycore zentai are manufactured as a single sheet, I-V, DC, and pulse waveforms over the extended voltage range of ¡À100 V and automatically attenuates the sample voltage for MAT core measurement.
The MHV can also supply up to 100 V peak AC waveforms for impedance analysis by amplifying the output of the MFRA module. DC and AC signals can be combined for high voltage C-V, Mott-Schottky, capacitance and impedance analysis.
Model MBST High Current Booster Module - maximum output ¡À 2 A
The standard MAT core module is able to provide current output of up to ¡À100 mA.Save on hydraulic hose and fittings dstti , For some applications higher current levels may be required, for example for characterization of semiconductors when biased in the on region, or for testing superconductors.
The MBST option provides up to ¡À2 A current output combined with reduced output impedance. This makes it much easier for the system to measure the voltage drop across the sample, providing impedance resolution in the 10 region.
The following table summarizes some of the key features and applications of the system.
ModuLab-MTS systems comprise a chassis with power supply and display panel,the Injection mold fast! and with either four or eight available slots, into which ModuLab-MTS modules may be inserted. As a minimum the system is fitted with one or more MAT-1MHz "core" modules; each of these in turn can then support one or more accessory cards, which include a frequency response analyzer, power booster, high voltage cards, femto ammeter for measuring very weak signal currents,The same Air purifier, cover removed. and a sample-reference switch card used to get the best possible results when measuring dielectric materials.
The system is controlled via an Ethernet interface from a PC running Windows XP or Vista using the powerful ModuLab-MTS operating software. A large selection of test types is provided, from standard open circuit, I-V, pulse, C-V, mott-Schottky, to complete multistep sequences that can include sample temperature control using a cryostat or high temperature furnace.
The standard MAT core module provides up to ¡À8 V stimulus to the sample. For many applications however, higher voltage is needed, for example when testing high impedance insulator materials.
The MAT option works together with the MHV to provide ultra-smooth swept voltage,Polycore zentai are manufactured as a single sheet, I-V, DC, and pulse waveforms over the extended voltage range of ¡À100 V and automatically attenuates the sample voltage for MAT core measurement.
The MHV can also supply up to 100 V peak AC waveforms for impedance analysis by amplifying the output of the MFRA module. DC and AC signals can be combined for high voltage C-V, Mott-Schottky, capacitance and impedance analysis.
Model MBST High Current Booster Module - maximum output ¡À 2 A
The standard MAT core module is able to provide current output of up to ¡À100 mA.Save on hydraulic hose and fittings dstti , For some applications higher current levels may be required, for example for characterization of semiconductors when biased in the on region, or for testing superconductors.
The MBST option provides up to ¡À2 A current output combined with reduced output impedance. This makes it much easier for the system to measure the voltage drop across the sample, providing impedance resolution in the 10 region.
没有评论:
发表评论